Windows 7 SP1 x86 x64 DVD-USB Release by StartSoft 10-11 2019

Download Windows 7 SP1 x86 x64 DVD-USB Release by StartSoft 10-11 2019

The assembly is designed to be installed on computers running Windows 7 SP1 with different bit depth. It includes two ISO images on the basis of which you can create a bootable USB flash drive with a size of 8 GB and above, or burn one of the versions to a DVD disc. In the multi-boot menu of the flash drive, you can select the desired bit depth for installing Windows on a computer. An ISO image designed for writing to a DVD has the ability to install the operating system using either the bootloader from Windows 10 or its installer taken from the original Windows 7 SP1 distribution.

Computer for the system:
- Processor: 1.6 GHz or more
- Memory: 1 GB (32-bit) or 2 GB (64-bit)
- HDD: 19 GB of free space (32-bit) or 20 GB (64-bit)
- DirectX 9 support with WDDM 1.0 or higher drivers
- Screen resolution: 1366 x768 and higher
- Availability of the Internet

Windows 7 SP1 x86 x64 DVD-USB Release by StartSoft 10-11 2019 torrent, changes:
- Version 10-2019 [Ru] x86 is designed to install the operating system on computers that do not support the installation of 64-bit systems and their processors do not have instructions for installing Windows 10, however, in this version it is possible to install the system including using the x32-bit bootloader from Windows 10, select the desired bootloader in the multiboot menu of the USB flash drive or DVD, if you boot your computer (laptop) from the boot media created on the basis of one of the ISO images presented in the distribution.
- Version 11-2019 [Ru] x86 x64 can be used to install the system on computers whose hard drives have sections of the GPT or MBR standards, and the formatting of the bootable flash drive can be done in FAT32 formats for machines with UEFI or NTFS for other computers that are built on the old base BIOS.

Original images on the basis of which the assembly was created
- en_windows_7_ultimate_with_sp1_x64_dvd_u_677391
- en_windows_7_ultimate_with_sp1_x86_dvd_u_677463
- en_windows_7_enterprise_with_sp1_x64_dvd_u_677671
- en_windows_7_enterprise_with_sp1_x86_dvd_u_677692
- en_windows_7_professional_with_sp1_vl_build_x64_dvd_622441
- en_windows_7_professional_with_sp1_vl_build_x86_dvd_623503

Revisions of the operating system available for installation on a PC
Version 10-2019 (Ru)
32-bit
- Windows 7 Starter
- Windows 7 Home Base
- Windows 7 Home Premium
- Windows 7 Professional
- Windows 7 Professional VL
- Windows 7 Corporate
- Windows 7 Ultimate
============================
Version 11-2019 (Ru)
32-bit
- Windows 7 Starter
- Windows 7 Home Base
- Windows 7 Home Premium
- Windows 7 Professional
- Windows 7 Professional VL
- Windows 7 Corporate
- Windows 7 Ultimate
64-bit
- Windows 7 Home Base
- Windows 7 Home Premium
- Windows 7 Professional
- Windows 7 Professional VL
- Windows 7 Corporate
- Windows 7 Ultimate

Note:
In all editions of both versions installed:
- Package. NET Framework 4.7.2
- Visual C ++ package 2005-2019 Author: Lisabon, version from 17-06-2019
- DirectX (June2010)
- Integrated updates from Simplix (it is recommended to continue to update the installed system using UpdatePack7R2, which is released monthly in the middle of each subsequent month on the website of its author).
- Libraries from jameszero

Creating a bootable flash drive using DiskPart utility
- Insert the USB flash drive into the USB port of the computer and run the command line: Start -> Run (or press the Win + R keys) and type the command cmd
In the console that opens, enter the following commands:
diskpart - run the utility diskpart
list disk - get the list of drives in the system, remember the index (number) of our flash drive
======================
select disk n - select the drive with the index n, where n is the index of your flash drive, see the size, it is specified.
- for example, index 3, then the command will be such select disk 3
======================
- The following command:
clean - clears existing partitions on a flash drive
======================
- Next, type the command:
create partition primary - primary partition is created
======================
- Next, type the command
format FS = FAT32 QUICK - fast USB flash drive formatted in FAT32 file system format
(if you need to format a USB flash drive in NTFS, then you need to type a command (format FS = NTFS QUICK)
=====================
- Next, type the command:
active - the command sets (makes) the created partition of the flash drive active (bootable)
=====================
- Next, type the command:
assign - command assigns a letter to the boot drive (automatically)
=====================
- Next, type the command:
exit - a command to exit the diskpart utility's working window.
=====================
- After you finish working with the utility Diskpart, copy the Windows installation files to a USB flash drive.
- Boot the PC from the USB flash drive and install the desired edition of the system.
=====================
- It is allowed to unpack the ISO image on the hard disk with the purpose of editing it at your discretion.
- At the end of the editing, it is not necessary to collect the edited distribution files again into an ISO image.
- And just copy the installation files of the edited image to the created bootable USB flash drive
====================
All is ready!
- Now you have a bootable USB flash drive with which you can install Windows.
====================
- This way the boot flash drive is created is remarkable in that
that it does not require any additional software.
- Once created, and then you no longer need to create a new boot partition on the new one.
- It is enough just to delete the contents of the flash drive and copy the new installation files onto it.

Checksums
File: Windows 7 SP1 x86 DVD Release by StartSoft 10-2019 [Ru] .iso
CRC-32: e9b7a3b6
MD5: 31abfbe27b7269208931960d00659ba7
SHA-1: 65dff554ce676ee79de3df43d42969a24ffc205a

File: Windows 7 SP1 x86 x64 USB Release by StartSoft 11-2019 [Ru] .iso
CRC-32: 17cae65b
MD5: 174fb0ddc39be7d61705d34137f830e3
SHA-1: 1bd5a3134fbb7a744d4c22a3dff310667dfe23ec

System activation
- In the contents of the flash drive (DVD) in the Bonus folder are activators to activate the operating system Windows 7 SP1.
- KMS activator is designed to activate the Corporate and Professional VL editions of the Windows 7 operating system.
- Activator Windows Loader to activate the remaining editions of the operating system Windows 7.

Note:
- The presence of activators in the BONUS folder does not mean their mandatory use by the PC user.
- The way to activate the installed system is chosen by the PC user at his own discretion and at will, in another word ... no one imposes this action on him, and the most reliable activation is the presence of a license key.

[Download ##download##]